Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Parts

Crank Brothers Candy 2
Crank Brothers' Candy pedals combine 4-sided cages for super-easy entry/exit with CNC'd aluminum platforms for top-notch support and impact durability. The Candy 2s feature chromoly axles, extra secure springs, steel wings and an open design to quickly shed mud, making them ideal for sloppy conditions and cyclocross. They keep your feet close to the axles for maximum pedal power, too.
SRAM XG-1090 10-Speed Cassette
Once again, SRAM pushes the envelope with their Powerdome X XG-1090 10-Speed Cassette. Light, stiff, quick, and quiet thanks to the ultra-strong, hollow, one-piece design and StealthRing elastomers, this cassette is worthy of even the nicest road machines. SRAM has added elastomer rings between every cog to provide a 'bed' where the plates of the chain interface with the cog. These elastomer StealthRings make for whisper-quiet operation. It's light, too, with the small 11T cog separate, and the remaining 9 cogs milled from a solid block of tool-grade steel pressed onto a single aluminium cog (the largest one). And, to REDuce even more weight, excess material in the space between each cog is milled away.
Shimano 7- and 8-Speed Chain Pins
- Replacement chain pin for 7- and 8-speed Shimano chains - 3 replacement pins per pack
Shimano BB-UN300 LL113
- Simple and reliable square taper bottom bracket - Replaces both BB-UN26 and BB-UN55 - Sealed cartridge bearings - Cr-Mo axle - For bicycles equipped with a chain case, select BB-UN300-K - For E-type front derailleur compatibility, choose BB-UN300-E - Fixing bolts not included; Shimano FC-E6000 bolts suggested
Shimano XT M771 Chainring
Shimano chainrings offer durability and confidence-inspiring performance, and go a long way towards getting a drivetrain back to optimum working condition.
Sunlite Lil Gripper
• Kraton rubber • Shock absorbing ridged design • 85mm
Race Face EXI Crank Bolt Washer
$0.50
RaceFace Crank Arm Fixing Bolts - M15
AheadSet Universal Preload Bolt
$0.90
- Aheadset preload adjusting bolt
Hayes HFX-Mag/-9 Sole Master Cylinder C-Clip
$0.99
Internally fitting service parts for Hayes hydraulic disc brake master cylinders. - All HFX-MAG compatible master cylinder internals are designed for the current aluminum piston/2mm push-rod platform (2003 and newer).
Hayes HFX-Mag/-9 Sole Master Cylinder Retaining Washer
$0.99
Internally fitting service parts for Hayes hydraulic disc brake master cylinders. - All HFX-MAG compatible master cylinder internals are designed for the current aluminum piston/2mm push-rod platform (2003 and newer).
Cane Creek 10-Series Interlok Headset Spacer
$1.00
Interlok spacers nest into the lip of Cane Creek headset uppers for a rock solid, flex-free fit. - Composite construction
Wolf Tooth Components 25mm B-Screw
$1.00
- Longer B-screw needed when using 40t or 42t cog with most Shimano derailleurs
Cane Creek 1-1/8-inch Headset Shim Spacer
$1.08
Shim spacers can be placed between bearing and compression cover in IS headsets to fine tune the fitment.
KMC 415H Connecting Link
$1.50
KMC 3/16" Master Link Chain Links - For 3/16" chain, extra wide - Extra-wide, for non-derailleur bikes: BMX, cruisers, etc - Perfectly fits on KMC 415H & 415H-NP chains
KMC Half Link Adapter
$1.50 - $2.00
- Half-link connector allows you to add or subtract half of one link (1/2 inch) from the chain in order to optimize chain tension - Uses standard chain pin connector and tool
Hayes HFX-Mag/-9, El Camino, Stroker Caliper-Hose Connection Seal
$1.99
HFX-Mag/-9, El Camino, Stroker Caliper-Hose Connection Seal
TRP Flat Mount Rear Caliper Mounting Bolt
$1.99
M5 bolts to mount your flat mount caliper to the frame. Sold as a QTY of 2.
Shimano M9000 Hose Cover
$2.00
This is a replacement Brake Hose Cover for the Lever End of Shimano BH90-SBM, BH90-SB levers. - Covers brake hose fitting at the brake lever
Surly Tuggnut/Snuggnut Retaining Clip
$2.00
- Replacement retaining clip for the Surly Tuggnut/Snuggnut
KMC 415H-OL Chain Connector
$2.50
Use to create your desired chain length in single-speed applications. Only one half link is needed. - Non-reusable - Width: 9.4 mm - Drivetrain Speeds: 1 - Color: Black - Chain Compatibility: Shimano , SRAM , Campagnolo , Connex , KMC
Hayes Banjo Bolt
$2.88
Replacement banjo bolt for Hayes hydraulic Brake systems.
Hayes Bleed Kit Adapter
$2.88
Bleed fittings specifically designed for Hayes hydraulic disc brakes.
Race Face Alloy Crank Spindle Spacer
$2.99
- For Race Face 30mm Cinch System cranks only - Allows switching crank arms between bikes, such as a FatBike and an XC MTB - Use RF-2999 for 8mm to 16mm hex wrench adapter to remove spindle
KMC MissingLink-KOOL CL710 Connector
$3.00
KMC Missing Link connectors are for use on new chains or to keep in your seat bag for an emergency repairs. - Compatible with KMC K710 and K710SL chains - No tools needed
SRAM BB30 Spacer - 15.46mm
$3.00
BB30 Spacer - 15.46mm
Shimano Deore XT M8000 Shift Pod Cable Adjusting Unit
$3.00
Shimano Mountain Deore XT M8000 Shift Pod Cable Adjusting Unit
Shimano Ultegra 6800 Front Derailleur Cable Fixing Assembly
$3.00
Shimano Front Derailleur Cable Fixing Assembly
Surly Tuggnut/Hurdy/Snuggnut QR Adaptor Washer
$3.00
- QR adapter washer for the Surly Tuggnut/Hurdy/Snuggnut
Wheels Manufacturing Inc. Flat Head Screw
$3.41 - $4.46
Replacement M5 x 8 Flat Head Screw fastener for derailleur hangers. - Thread: M5-0.8 - Overall Length: 8mm - Material: Steel - Use with 3mm hex wrench - Bag of 5
Wheels Manufacturing Inc. Socket Head Screw
$3.41
Replacement M3 x 10 Socket Head Screw fastener for derailleur hangers. - Thread: M3-0.5 - Thread length: 10mm - Use with 2.5mm hex wrench - Bag of 5
Page 1 of 135 Next page